Setting Up A User-Defined Station Program; Selecting The Station To Program - Toro TIS-240 User Manual

User-defined Station Programming
Within the User-defined programming mode are two format options:
User-With ET and User-No ET. Both formats require the same basic
setup process, with the exception that User-With ET mode enables a
Reference ET value to be selected.
When the User - With ET option is used, the station's baseline watering
progam is updated daily by the ET Everywhere service and adjusted
automatically to suit current ET conditions.
When the User - No ET option is used, the station's watering progam
remains constant, without regard to changes in ET rate.
A baseline watering program is established for the station using the
following User-defined setup parameters:
• Water Window Option
• Cycle Time
• Number of Cycles per day
• Soak Time
• Watering Day Schedule
• Reference ET (User-With ET format only)
Select the Station to Program
Turn the Function Selector knob to PROGRAM to view
1.
the following display:
SET STA TO PROGRAM
STA 01
Station 1 is automatically selected. To change the station number,
2.
turn the Lower Line knob.
Note: The number of active stations defined in the Setup function,
determines the number of stations that can be selected.
29