Table of Contents
Advertisement
Selecting the Usable Rainfall
The amount of watered area not restricted from rainfall determines
the Usable Rainfall setting of 100% or None. For example, a planter
that is blocked from rainfall by a roof overhang would have a
Usable Rainfall value of None. An open lawn area with no obstructions
would be 100%.
Note: When None is selected, the station will continue to operate during
a watering hold condition initiated by Rain Pause or an active Rain Sensor.
1.
Within the Program menu, turn the Upper Line knob to view
the following display:
USABLE RAINFALL
100%
2.
100% is select by default. To adjust the value to None, turn
the Lower Line knob.
Note: The additional percentage factors (25%, 50% and 75%)
displayed between None and 100% apply to systems utilizing
the optional WeathTRAK Rain Service.
Completing Automatic Programming
1.
Within the Program menu, turn the Upper Line knob to view
the following display:
PROGRAM COMPLETE
2.
T
urn the Upper Line knob to continue programming the stations.
The next station number in sequence will be selected. To select a
different station number, turn the Lower Line knob.
3.
Repeat the programming process for each station as needed.
!
Important:
If there are other stations remaining to be programmed that will use
the same or similar program set up, the COPY function can be used to
transfer the complete program setup information from one station to
another or to all stations at the same time. Minor program changes to
individual stations can then be made quickly, greatly reducing the time
involved in programming 24 stations.
See "Using the Copy Function" on page 38 for detailed information.
28
STA 01
STA 01
Hide quick links:
Advertisement
Table of Contents
