Schedule Setup; Water Days; Schedule Start Setup - Toro EVOLUTION Series User Manual

Schedule Setup

TM
The EVOLUTION controller only displays one schedule by default. See the
needed.
Water Days Setup
TM
The EVOLUTION controller allows for flexible watering by giving you four schedule options: 7-day, Even days, Odd days or Interval
days. By default, the 7-day schedule is set for the schedule. To set watering days to Odd, Even or Interval, see the
section.
7-Day Scheduling
The 7-day schedule allows you to activate or turn off any of the days in the week. By default, all days are active.
Step 1
– Press the SCHEDULES button.
Step 2
– (For controllers with multiple active schedules only.)
Use the Up
Note: The Schedule and Zone names can be customized using the EVOLUTION
www.toro.com/evolution.
Step 3
– Use the Up
SCHEDULE
S M T W T
Step 4
– Use the Left
or turn off
Step 5
– Press SELECT
Step 6
– Press the BACK

Schedule Start Setup

By default, the EVOLUTION
per schedule. Once a start is activated, the schedule will activate the first zone (lowest number). Once it is complete, the second zone will
water. The schedule will continue until all zones with runtimes have been activated.
Step 1
– Press the SCHEDULES button.
Step 2
– (For controllers with multiple active schedules only.)
Use the Up
Note: The Schedule name can be customized using the EVOLUTION
www.toro.com/evolution.
Step 3
– Use the Up
SCHEDULE
START
ADD START
EACH START RUNS ALL
SCHEDULED ZONES
Step 4
– Use the Left
arrows to set your desired start time. Press SELECT
Step 5
– Navigate to ADD START to add another start time. Press SELECT
Step 6
– To delete a start time, set the time to OFF. The OFF selection is located between the full hour of 11:00 AM/PM and the full
hour of 12:00 AM/PM (23:00 and 00:00).
Step 7
– Press the BACK
10
or Down arrows to select the Schedule you want to edit. Press SELECT
or Down arrows to navigate to WATER DAYS. Press SELECT
F S
or Right arrows to navigate within the days of the week. Use the Up
the day for watering. Repeat for all days of the week.
to save the changes and return to the SCHEDULES menu.
arrow to return to the previous menu or
TM
controller is set with 1 start time set to OFF. Additional Starts can be added with a maximum of four starts
or Down arrows to select the Schedule you want to edit. Press SELECT
or Down arrows to navigate to SCHEDULE STARTS. Press SELECT
01:00AM
or Right arrows to navigate to the start time's Hours, Minutes and AM/PM. Use the Up
arrow to return to the previous menu or
section to activate additional schedules if
TM
Software which can be accessed at
.
HOME to return to the main screen.
TM
Software which can be accessed at
to save.
. Modify the new start time as indicated in Step 3.
HOME to return to the main screen.
.
or Down arrows to activate
.
.
or Down