Toro TIS-240 User Manual page 7

1
Chapter 1
Controller Setup
The following checklist provides the basic recommended steps
to guide you through the setup, programming and operation of
your Intellli-Sense TIS-240 controller:
Thoroughly inspect the entire irrigation system to ensure
that all sprinklers and valves are working properly and that
the water supply is sufficient to operate each sprinkler zone
at optimum efficiency.
Take some time to read through this manual to become
familiar with the various controller components, program-
ming steps, installation procedures, operating features and
controller capabilities.
Install the controller per the installation instructions provided
on pages 71–75.
Fill out the Irrigation System and Landscape Detail Worksheet.
provided. The information recorded on this worksheet will be
used for reference during the setup and programming process
as well as the (optional) WeatherTRAK ET Everywhere service
activation.
Set up and program your controller using the step-by-step
procedures beginning with "Controller Setup" on page 7.
(Optional) Activate the WeatherTRAK ET Everywhere
subscription service by calling 1-800-362-8774.
.
3