Communication Alert; Valve Alert - Toro TIS-240 User Manual

3. Turn the Lower Line knob to view other stations that affected by
the alert condition.
4. To resolve the Day Pattern Alert, simply increase the number
of watering days for the affected station numbers. When the
condition has been resolved, the Alert message will be turned off.

Communication Alert

This alert appears if the ET Everwhere service has failed to
communicate with the controller for a period of four consecutive
days. During this time, the controller will use the last ET data
received from the ET Everywhere service to calculate operating
requirements. After four days, the Maximum Backup ET value
entered in the Setup function will be used for ET calulation and
an Alert message will be displayed as shown in the following
example:
COMMUNICATION STATUS
COMMUNICATION LOST
STATUS: WARNING SEE ALERT
Note: In addition to the Alert display, an audible beep tone will be
sounded every 30 seconds (if Beep on Message is turned on).
To resolve the Communication Alert, contact WeatherTRAK
customer support at 1-800-362-8874 for assistance.

Valve Alert

The following Alert display example indicates a valve output problem
has occured on two stations.
ALERTS
ALERT:
1. To resolve the problem, turn the Upper Line dial to view the
following display:
VALVE FAILURE
# failed valves: 02
ALERT:
WND DAY COM VAL
––– –-- –-- 002
See Alert Menu
See Alert Menu
57