Toro TIS-240 User Manual page 49

Note: Using the Review function in conjunction with Adjust
function provides a convenient reference of actual station operating
values before and after the calculated adjustments.
Turn the Function Selector knob toREVIEW. The display will
4.
show all current operating information for station 01.
ST01 A 12.5 MIN 01X AUTO
Wk1:––––T–– +05% Soak
The calculated program changes for the station will be displayed.
In this example, a +05% adjustment resulted in a Cycle time
increase from 11.9 minutes to 12.5 minutes.
Note: When an increase adjustment is made, the controller
automatically calculates a program solution that provides an
increase in watering without exceeding the soil's capacity to
absorb and hold water (resulting in runoff). In the example
above, simply increasing the Cycle time provided the solution.
If an increase in Cycle time would exceed the runoff point,
a decrease in Cycle time accompanied by an increase in watering
frequency (either by increased active days or watering cycles
per day) could result.
5
45