Restoring SETUP Function Default Values
!
Important:
Restoring the controller Setup default values erases all user-defined
values and settings within this function.
1.
Turn the Function Selector knob to COPY to view the following
display:
COPY FROM STA 01
To STA 02
Note: The number of active stations defined in the Setup function,
determines the number of stations that can be selected.
2.
Turn the Upper Line knob right one stop past Schedule Defaults
to view the following display:
COPY SETUP DEFAULTS
3.
Press and hold the COPY button. Release the button when
COPYING DONE! is displayed.
COPYING
(Press COPY)
(Press COPY)
DONE!
41