Beep On Message; Data Encription Mask; Runtime Valve Test - Toro TIS-240 User Manual

Beep on Message?

1. Within the Help menu, turn the Upper Line knob to view the
following display:
BEEP ON MESSAGE?
No
By default, Beep On Message turned off. To turn Beep On Message
2.
on, turn the Lower Line knob to select Yes.
Note: If Yes is selected, it will automatically revert to No at Midnight
if Phase Lock has not been set. Once Phase Lock has been set,
Beep on Message will be automatically turned on.
Data Encryption Mask
1. Within the Help menu, turn the Upper Line knob to view the
following display (example):
DATA ENCRYPTION MASK
02341234567877665244 (OK)

Runtime Valve Test

This feature automatically checks the condition of each valve during
operation. If a problem exists, the affected station number(s) and type
of problem will be indicated.
1. Within the HELP menu, turn the Upper Line knob to view the
following display:
RUNTIME VALVE TEST
ON
2. By default, the Runtime Valve Test feature is ON. To disable the
test, turn the Lower Line knob to select OFF.
52