Checking The Constant Velocity Joint Dust Boots; Checking The Steering System - Yamaha YXR70FX Service Manual

Off-road motorcycle
Hide thumbs Also See for YXR70FX:
Table of Contents

Advertisement

CHECKING THE CONSTANT VELOCITY JOINT DUST
BOOTS/CHECKING THE STEERING SYSTEM
È
É
1
CHECKING THE CONSTANT VELOCITY
JOINT DUST BOOTS
1. Check:
• dust boots 1
È Front
É Rear
1

CHECKING THE STEERING SYSTEM

1. Place the vehicle on a level surface.
2. Check:
• steering assembly bearings
3. Check:
• tie-rod ends
4. Raise the front end of the vehicle so that
5. Check:
• ball joints and/or wheel bearings
3 - 43
Damage → Replace.
Refer to "FRONT CONSTANT VELOCITY
JOINTS,
DIFFERENTIAL
DRIVE SHAFT" in chapter 7.
Try to move the steering wheel up and
down, and back and forth.
Excessive play → Replace the steering
shaft assembly.
Turn the steering wheel to the left and right
until it stops completely, and then move the
steering wheel slightly in the opposite direc-
tion.
Vertical play → Replace the tie-rod end.
there is no weight on the front wheels.
Move the wheels laterally back and forth.
Excessive free play → Replace the front
arms (upper and lower) and/or wheel bear-
ings.
CHK
ADJ
GEAR
AND

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rhino 700 2008Rhino 700fi 2008Rhino yxr70fx 2008

Table of Contents