Yamaha YXR70FX Service Manual page 356

REAR CONSTANT VELOCITY JOINTS, FINAL DRIVE
GEAR AND DRIVE SHAFT
2. Install:
• ring gear bearing housing
• M8 bolts (ring gear bearing housing) 1
• M10 bolts (ring gear bearing housing) 2
TIP:
Apply sealant to the bolts 1 and 2 threads.
3. Install:
• bearing retainer
M MMM M MMM M
a. Place a folded rag 1.
b. Secure the final drive pinion gear bearing
housing edge in the vise.
TIP:
Apply locking agent (LOCTITE
of bearing retainer.
c. Attach the bearing retainer wrench 2.
Bearing retainer wrench
Middle gear bearing retainer
d. Tighten the bearing retainer.
Bearing retainer
NOTICE
The bearing retainer has left-hand threads.
Turn the retainer counterclockwise to
tighten it.
L LLL L LLL L
7 - 41
DRIV
23 Nm (2.3 m · kg, 17 ft · lb)
40 Nm (4.0 m · kg, 29 ft · lb)
M MMM M M MMM M M MMM M
®
) to the threads
90890-04128
YM-04128
170 Nm (17.0 m · kg, 125 ft · lb)
®
LOCTITE
L LLL L L LLL L L LLL L
M MMM M MMM
L LLL L LLL