M Thermostat outlet hose
N ISC (idle speed control) unit lead
O Coolant temperature sensor lead
P Intake air temperature sensor lead
Q Ignition coil lead
È Route the throttle cable through the cable guide.
É Fasten the starter motor lead, wire harness, and
ground lead with the plastic band, making sure
to align the red tape on the leads and harness
with the band.
CABLE ROUTING
Ê Fasten the throttle body breather hose and wire
harness with the plastic band.
Ë Fasten the starter motor lead and ground lead
with the holder.
Ì Fasten the fuel hose with the plastic holder.
Í Make sure that the plastic band is not fastened
too tightly around the wire harness.
Î Fasten the wire harness with the plastic band.
Ï Fasten the spark plug lead and parking brake
cable with the plastic holder.
2 - 43
SPEC