Checking The Final Gear Oil Level; Checking The Constant Velocity Joint Dust Boots - Yamaha YFM45FAT Supplementary Service Manual

CHECKING THE FINAL GEAR OIL LEVEL/CHECKING
THE CONSTANT VELOCITY JOINT DUST BOOTS
È
É
1
1
– 24 –

CHECKING THE FINAL GEAR OIL LEVEL

1. Place the vehicle on a level surface.
2. Remove:
• oil filler plug 1
3. Check:
• oil level
Oil level should be up to the brim of the
hole.
Oil level low → Add oil to the proper level.
Recommended oil
SAE 80 API "GL-4" Hypoid gear
oil
CAUTION:
Take care not allow foreign material to
enter the final gear case.
4. Install:
• oil filler plug
CHECKING THE CONSTANT VELOCITY
JOINT DUST BOOTS
1. Check:
• dust boots 1
Damage → Replace.
Refer to "FRONT CONSTANT VELOCITY
JOINTS AND DIFFERENTIAL GEAR" in
chapter 7 (Manual No.: 5ND2-AE1) for the
front constant velocity joint dust boots or
"REAR CONSTANT VELOCITY JOINTS,
FINAL DRIVE GEAR AND DRIVE SHAFT"
for the rear constant velocity joint dust
boots.
È Front
É Rear
CHK
ADJ
·
23 Nm (2.3 m kg, 17 ft
·
lb)