Yamaha YXR70FX Service Manual page 345

REAR CONSTANT VELOCITY JOINTS, FINAL DRIVE
È
6
GEAR AND DRIVE SHAFT
3. Apply:
• molybdenum disulfide grease
(into the ball joint assembly)
TIP:
_
Molybdenum disulfide grease is included in the
repair kit.
4. Install:
• dust boots 1
• boot bands 2, 3, 4, 5
M MMM
a. Apply molybdenum disulfide grease into the
dust boots.
b. Install the dust boots.
c. Install the dust boot bands 4, 5.
Use a boot band installing tool 6.
4
TIP:
• The new boot bands may differ from the orig-
inal ones.
• The dust boots should be fastened with the
boot bands 3 and 5 at the grooves in the
joint shaft.
L LLL
5. Check:
• thrust movement free play
Excessive play → Replace the joint assem-
bly.
7 - 30
DRIV
M MMM M M MMM M M MMM M M MMM
Molybdenum disulfide grease
55 g (1.9 oz) per dust boot (rear
wheel side)
65 g (2.3 oz) per dust boot (final
gear case side)
Boot band installing tool
90890-01526, YM-01526
L LLL L L LLL L L LLL L L LLL
New
M M MMM M MMM
L L LLL L LLL