Fip2.6 Paper Size Error/Duplex - Oki B6500 Service Manual

FIP2.6 Paper Size Error/Duplex

Step
Possible causes:
HVPS/MCU (PL12.1.19)
GUIDE TRAY LEFT (PL7.1.7)
1
PWBA FEEDER 550 (PL20.1.34)
Checking paper size Is the paper size capable for
duplex printing?
Checking the paper size setup
2 Does the paper size in use match the size set by
GUIDE ASSY END?
Checking NVRAM data
3
Does NV01 setup match the specification of printer?
Checking the paper tray (1)
4
Is it Tray 1 that is in use, when Error occurred?
Checking the paper tray (2)
5
Is it Tray 2 that is in use, when Error occurred?
Checking the paper tray (3)
6
Is it Tray 3 that is in use, when Error occurred?
Checking the paper tray (4)
7
Is it Tray 4 that is in use, when Error occurred?
Check
1 – 75
Chapter 1 Troubleshooting
Yes
Go to step 2. Replace the paper.
Change the paper
Go to step 3.
Modify the memory
Go to step 4.
data of NV01.
Replace HVPS/
MCU. Go to step 5.
(RRP12.10)
Replace HVPS/
MCU. Go to step 6.
(RRP12.10)
Go to FIP4.6, 4.7
PWBA FEEDER Go to step 7.
550.
Go to FIP4.6, 4.7
Replace HVPS/
PWBA FEEDER
MCU. (RRP12.10)
550.
No
size setup.