Fip1.14 No Paper/Tray 1, 2 - Oki B6500 Service Manual

FIP1.14 No Paper/Tray 1, 2

Step
Possible causes:
SENSOR NO PAPER (PL5.1.38, PL7.1.38)
ACTUATOR NO PAPER (PL5.1.6, PL7.1.14)
HVPS/MCU (PL12.1.19)
LVPS (PL12.1.5)
PLATE ASSY BTM (PL2.1.10, PL4.1.10)
RACK BTM LOCK 550 (PL4.1.21)
HOUSING BASE 550(PL4.1.44)
1 Does Error Code indicate Tray 3 or Tray 4?
Checking if there is any paper Is there any paper in
2
Tray 1 or Tray 2?
Is PLATE ASSY BTM (PL2.1.10, PL4.1.10) lifted cor-
3
rectly?
With pressing down PLATE ASSY BTM, press the cen-
ter area of RACK BTM LOCK 550 against HOUSING
BASE 550.
4
Checking ACTUATOR NO PAPER for operation
Remove Paper Cassette. When putting hand from the
5 cassette insertion space to move ACTUATOR NO
PAPER, does ACTUATOR NO PAPER move
smoothly?
Checking SENSOR NO PAPER for operation
Remove EP CARTRIDGE.
Does number of Sensor/Switch Check increase by one,
6
when ACTUATOR NO PAPER is pushed and released?
Check using Chapter 2 Diagnostic [Sensor/Switch
Check].
Check
1 – 29
Chapter 1 Troubleshooting
Yes
Go to FIP4.2 "No
Go to step 2.
Paper/Tray 3, 4".
Go to step 3. Supply paper.
Remove Paper
Go to step 4. Cassette, and then
reinstall it correctly.
Are RACK BTM
LOCK 550 and
Work over the
HOUSING BASE
installation of
550 touched each
other without any
space?
again.(RRP4.6)
Go to step 5.
Go to step 6. ACTUATOR NO
Replace Go to FIP2.6
HVPS/MCU. SENSOR NO
(RRP12.10)
No
RACK BTM
LOCK 550
Replace
PAPER.
PAPER.