Oki B6500 Service Manual page 12

5.5.2 Installing Option Duplex
For details, refer to the Instruction Manual supplied with the main unit or Chapter 3 RRP
21.1 Option Duplex.
Before the installation, turn off the power and plug off the power cord.
1) Unpack the Option Duplex, remove cushioning materials, and confirm that all
attachments are available.
2) Remove the COVER DUP and CONNECTOR COVER on rear of the laser printer.
Keep the removed COVER DUP and CONNECTOR COVER carefully.
3) Fit the hooks on the lower part of the Option Duplex with the holes on the rear of
the laser printer to install.
4) Tighten the screws (two) on the lower part of the Option Duplex to fix securely.
5) Connect the power cord.
6) Turn on the power switch of the laser printer.
7) Try some test duplex-printings to confirm that there is no problem.
5.5.3 Installing Option Face Up Tray
For details, refer to the Instruction Manual supplied with the main unit.
Before the installation, turn off the power and plug off the power cord.
1) Unpack the Option Face Up Tray, remove cushioning materials, and confirm that all
attachments are available.
2) Insert the front edge of the Option Face Up Tray into the slot on the upper-rear of the
laser printer to install.
3) Connect the power cord.
4) Turn on the power switch of the laser printer.
5) Try running some test prints to eject onto the Option Face Up Tray and confirm that
there are no problems.
xi