6)
Install the CHUTE TRANSFER (PL 6.1) (RRP6.9).
Do not tighten the screw to the left side hole of the CHUTE TRANSFER.
7)
Install the COVER REAR (PL 1.1) (RRP1.1).
There are 2 kinds of screws, make sure they are installed correctly.
8)
Install the FUSER ASSEMBLY (PL 6.1) (RRP6.8).
9)
Install the COVER REAR 500 (PL 7.1) (RRP7.9).
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 85