Rrp6.6 Lever Guide (Pl 6.1.14) - Oki B6500 Service Manual

RRP6.6 LEVER GUIDE (PL 6.1.14)
Removal
1) Remove the COVER REAR 500 (PL 7.1) (RRP7.9).
2) Remove the COVER REAR (PL 1.1) (RRP1.1).
3) Remove the FUSER ASSEMBLY (PL 6.1) (RRP6.8).
4) Remove the COVER LEFT (PL 1.1) (RRP1.3).
5) Remove the COVER RIGHT (PL 1.1) (RRP1.2).
6) Remove the COVER EXIT 500 (PL 1.1) (RRP7.1).
7) Remove the 500 EXIT ASSEMBLY (PL 7.1) (RRP7.2).
8) Remove the COVER TOP (PL 1.1) (RRP1.4).
9) Remove the COVER FRONT (PL 1.1) (RRP1.5).
10) Remove the BTR ASSEMBLY (PL 6.1) (RRP6.9).
11) Remove the DUCT FRONT (PL 6.1) (RRP6.2).
12) Remove the ROS ASSEMBLY (PL 6.1) (RRP6.1).
Be careful not to drop or strike the ROS Assembly with any tools or other objects.
13) Remove the SHIELD PLATE ROS (PL 6.1) (RRP6.3).
14) Remove the GUIDE TRAY LEFT (PL 5.1) (RRP5.8).
15) Remove the MOTOR COVER (PL 8.1) (RRP8.1).
16) Remove the SHIELD PLATE LVPS (PL 9.1) (RRP8.1).
17) Remove the GUIDE CRU LEFT (PL 6.1) (RRP6.4).
18) Remove the COVER GUIDE CRU (PL 6.1) and HARNESS ASSEMBLY FUSER (PL 6.1) from the
GUIDE CRU LEFT (RRP6.7).
19) Remove the INTERLOCK S/W 24V (PL 6.1) and INTERLOCK S/W 5V (PL 6.1) (RRP6.5).
20) Remove the SPRING SL (PL 6.1) from the GUIDE CRU LEFT (Figure 1).
21) Remove the SPACER SS (PL 6.1) from the GUIDE CRU LEFT (Figure 1).
22) Remove the GUIDE SL (PL 6.1) from the GUIDE CRU LEFT (Figure 1).
23) Remove the LEVER GUIDE from the GUIDE CRU LEFT (Figure 1).
Chapter 3 Removal and Replacement Procedures (RRPs)
Figure 1. Guide Lever
3 - 105