Fip3.5 Paper Size Error/Oct - Oki B6500 Service Manual

FIP3.5 Paper Size Error/OCT

Step
Possible causes:
HVPS/MCU (PL12.1.19)
GUIDE TRAY LEFT (PL7.1.7)
PWBA FEEDER 550 (PL20.1.34)
Checking the paper size setup
1 Does the size of paper in use match the size set by
GUIDE ASSY END?
Checking NVRAM data Does NV01 configuration 2
2
meet specifications?
Checking the paper tray (1)
3 Is the paper supplied from Tray 1, when Error
occurred?
Checking the paper tray (2)
4 Is the paper supplied from Tray 2, when Error
occurred?
Checking the paper tray (3)
5 Is the paper supplied from Tray 3, when Error
occurred?
Checking the paper tray (4)
6 Is the paper supplied from Tray 4, when Error
occurred?
Check
1 – 86
Chapter 1 Troubleshooting
Yes
Change the paper
Go to step 2.
size setting.
Modify the memory
Go to step 3.
Replace HVPS/
MCU. Go to step 4.
(RRP12.10)
Replace HVPS/
MCU. Go to step 5.
(RRP12.10)
Go to FIP4.6, 4.7
PWBA FEEDER Go to step 6.
550.
Go to FIP4.6, 4.7
Replace HVPS/
PWBA FEEDER
MCU. (RRP12.10)
550.
No
data.