Rrp4.3 Clutch Oneway Nudger (Pl 4.1) - Oki B6500 Service Manual

RRP4.3 CLUTCH ONEWAY NUDGER (PL 4.1)
Removal
1) Open the COVER OPEN (PL 1.1).
2) Remove the ROLL ASSEMBLY FEED (PL 4.1) (RRP4.2).
When removing, do not touch the roller surface of the ROLL ASSEMBLY FEED.
3) Pull out the CLUTCH ONEWAY FEED (PL 4.1) from the SHAFT FEED (PL 4.1) (Figure 1).
4) Remove the E-ring securing the CLUTCH ONEWAY NUDGER (PL 4.1) to the SHAFT FEED (Fig-
ure 1).
5) Pull out the CLUTCH ONEWAY NUDGER from the SHAFT FEED (Figure 1).
Replacement
1) Install the CLUTCH ONEWAY NUDGER (PL 4.1) to the SHAFT FEED (PL 4.1).
2) Clip the E-ring to the SHAFT FEED to secure the CLUTCH ONEWAY NUDGER.
3) Install the CLUTCH ONEWAY FEED (PL 4.1) to the SHAFT FEED.
4) Install the ROLL ASSEMBLY FEED (PL 4.1) to the SHAFT FEED, and secure it with the hook
(RRP4.2).
Be sure to install the hook of the ROLL ASSEMBLY FEED into the groove of the SHAFT
FEED.
5) Close the COVER OPEN (PL 1.1).
Chapter 3 Removal and Replacement Procedures (RRPs)
Figure 1. One-way Nudger Clutch
3 - 60