Rrp6.4 Guide Cru Left (Pl 6.1) - Oki B6500 Service Manual

RRP6.4 GUIDE CRU LEFT (PL 6.1)
Removal
1) Remove the COVER REAR 500 (PL 7.1) (RRP7.9).
2) Remove the COVER REAR (PL 1.1) (RRP1.1).
3) Remove the COVER LEFT (PL 1.1) (RRP1.3).
4) Remove the COVER RIGHT (PL 1.1) (RRP1.2).
5) Remove the COVER EXIT 500 (PL 1.1) (RRP7.1).
6) Remove the 500 EXIT ASSEMBLY (PL 7.1) (RRP7.2).
7) Remove the COVER TOP (PL 1.1) (RRP1.4).
8) Remove the COVER FRONT (PL 1.1) (RRP1.5).
9) Remove the FUSER ASSEMBLY (PL 6.1) (RRP6.8).
10) Remove the BTR ASSEMBLY (PL 6.1) (RRP6.9).
11) Remove the GUIDE TRAY LEFT (PL 5.1) (RRP5.8).
12) Remove the DUCT FRONT (PL 6.1) (RRP6.2).
13) Remove the ROS ASSEMBLY (PL 6.1) (RRP6.1).
Be careful not to drop or strike the ROS Assembly with any tools or other objects.
14) Remove the SHIELD PLATE ROS (PL 6.1) (RRP6.3).
15) While lifting up the 150 FEEDER ASSEMBLY, remove the MOTOR COVER (PL 8.1) (RRP8.1).
16) Remove the SHIELD PLATE LVPS (PL 9.1) (RRP9.1).
17) Remove the connector (P/J46 and P/J47) of the HARNESS ASSEMBLY FUSER (PL 6.1) from the
frame (Figure 1).
18) Remove the harness clamp holding the HARNESS ASSEMBLY FUSER attached to the GUIDE
CRU LEFT to the frame (Figure 1).
Chapter 3 Removal and Replacement Procedures (RRPs)
Figure 1. Left CRU Guide
3 - 100