Oki B6500 Service Manual page 14

6. Dismantlement
6.1 Dismantlement procedures
6.1.1 Dismantling laser printer and option units
For details, refer to the Instruction Manual or Chapter 3 Removal and Replacement
Procedures.
The dismantlement process is performed by following installation procedures in
reverse sequence.
When holding up the later printer, be sure to grasp the handles with both hands.
Grasping a part other than the handles results in fall or damage of the laser printer.
When lifting the later printer, bend your knees thoroughly to prevent lower back
strain.
Be sure to remove the EP CARTRIDGE from the laser printer and put it into a
plastic bag.
Be sure to re-use the protection sheets and fixing materials, which are removed
during the installation.
Confirm that no attachment is missing.
Be sure to use the cushioning materials properly.
xiii