Fip1.22 Face Up Tray Error - Oki B6500 Service Manual

FIP1.22 Face Up Tray Error

Step
Possible causes:
HVPS/MCU (PL12.1.19)
SENSOR FACE UP OPEN (PL10.1.25)
GATE FU (PL10.2.6)
LEVER GATE FU (PL10.2.17)
Checking Actuator for operation
Does ACTUATOR FULL STACK in GATE FU move
1
smoothly, when moving LEVER GATE FU up and
down?
Checking SENSOR FACE UP for operation
Remove EP CARTRIDGE.
Does the number of Sensor/Switch Check increase by
2 one, every time moving LEVER GATE FU up and
down?
Check using Chapter 2 Diagnostic [Sensor/Switch
Check].
Checking SENSOR FACE UP OPEN for operation
Replace SENSOR FACE UP OPEN.
3
Does the problem still occur, after replacing SENSOR
FACE UP OPEN?
Check
1 – 39
Chapter 1 Troubleshooting
Yes
With tool Go to
step 2. Without Replace GATE FU.
tool Go to step3.
Go to FIP1.44
Go to step 3. SENSOR FACE
Replace HVPS/
MCU. End of work
(RRP12.10)
No
UP OPEN.