R2" (Link/Gateway Repeater Call Sign) Programming - Icom i9100 Instruction Manual

7
DV MODE PROGRAMMING
■ Call sign programming (Continued)
D Access/Area repeater call sign
"R1" (
The access/area and link/gateway repeater call signs
must be programmed in "R1" and "R2."
Other repeater call signs can be stored in the "RP-L"
screen (Repeater list) (p. 88).
q Push [DV•DR] to select the DV mode.
w Push [MENU] one or more times to display the "M3"
screen (Menu 3).
• In the DR mode, push [MENU] once or twice to select
the "D1" screen.
e Push [CS](F-1) to display the "CS" screen (Call
Sign).
r Push [Z](F-1) one or more times to display the "R1"
or "R2" screen (Repeater call sign setting).
t Push [EDT](F-3) to enter the call sign programming
mode.
• A cursor appears and blinks.
y Rotate [MAIN DIAL] to select the first character to
input.
When inputting numbers, push the appropriate key-
pad key.
• Push [DEL](F-4) to delete the selected character or
number.
• Push [SPC](F-5) to input a space.
u Push [Ω](F-2) to move the cursor backwards, or
push [≈](F-3) to move the cursor forwards.
i Repeat steps y and u to enter a desired repeater
call sign.
• A call sign of up to 8 digits can be set.
o Push [MENU] to store the programmed call sign.
!0 Push [MENU] again to return to the "CS" screen.
87
Link/Gateway repeater call sign
) and "R2" (
M3
CS
CS U
Ú
R 1
Ú
R1
Ú
) programming
[CS]/[√] [EDT]
[MENU] [DV DR]
C D R > C S U R
R
CQCQCQ
R 1
M R
NOT USE
Y 2
≈
C L R E D T N A M E
Ω ≈
D E L
[MAIN DIAL]
DSET
R1
G R P
R1
S P C