Register Your Call Sign At A Gateway Repeater - Icom ID-5100A Full Manual

Previous view
6
D-STAR OPERATION <BASIC>

Register your call sign at a gateway repeater

To use the Internet, you must register your call sign with
a repeater that has a gateway, usually one near your
home location.
About the registration process described:
This section describes the call sign registration pro-
cess at a repeater that is connected to the US Trust
server.
There are other systems as well, and they have their
own registration process. For information on how to
register on one of them, contact the administrator of
a repeater that uses the alternate system.
If needed, ask the gateway repeater administrator
for call sign registration instructions.
1. Access the call sign registration screen
Access the following URL to find the gateway repeat-
q
er closest to you.
http://www.dstarusers.org/repeaters.php
Click the call sign of the repeater that you want to
w
register to.
Click the "Gateway Registration URL:" link address.
e
The "D-STAR Gateway System" screen appears.
r
Click [Register] to start the New User registration.
2. Register your call sign
Follow the registration instructions found there.
t
When you receive a notification from the administra-
y
tor, your call sign registration has been approved.
3. Register your personal information
After your registration is approved, log in your per-
u
sonal account with your registered call sign and
password.
4. Register your D-Star equipment
Register your D-STAR equipment information.
i
Ask the gateway repeater administrator for details.
When your registration is complete, log out of your
o
personal account, and start using the D-STAR net-
work.
NOTE: You must register your D-STAR equipment
BEFORE you can make calls through the gateway.
6-7
Click
Click