Scans; Scan Types - Icom i9100 Instruction Manual

11

SCANS

■ Scan types

Scanning automatically searches for signals and
makes it easier to locate new stations for contact or lis-
tening purposes. The IC-9100 has several scan types;
Programmed scan, Memory scan, Select Memory
scan, Mode Select scan and ∂F (Delta Frequency)
scan.
PROGRAMMED SCAN (p. 149)
Repeatedly scans between scan edges. P1 scans
between 1A and 1b, P2 scans between 2A and 2b,
and P3 scans between 3A and 3b frequencies.
This scan operates in the VFO mode.
1A
2A
3A
MODE SELECT SCAN (p. 150)
Repeatedly scans all selected mode Memory chan-
nels.
This scan operates in the memory mode.
USB
FM
FM
∂F SCAN (p. 152)
Repeatedly scans within the ∂F span area.
This scan operates in both VFO and memory
modes.
∂F frequency
–
145
1b
2b
Scan edges
3b
Scan
Jump
FM CW
FM USB
Center frequency
(Start frequency)
+∂F frequency
Scan
Jump
The MAIN and SUB Bands can be independently
scanned. When the SUB Band setting mode is turned ON
(" " appears), the SUB Band is scanned.
MEMORY SCAN (p. 150)
Repeatedly scans all programmed Memory chan-
nels.
This scan operates in the memory mode.
Mch 1
SEL
Mch 99
SELECT MEMORY SCAN (p. 151)
Repeatedly scans all Select Memory channels.
This scan operates in the memory mode.
Mch 1
FM SEL
Mch 99
SEL
Mch 2 Mch 3 Mch 4
Mch 7 Mch 6
SEL SEL
SEL
Mch 2 Mch 3 Mch 4
Mch 7 Mch 6
SEL SEL
SEL Mch 5
Mch 5
SEL