Quick Split Function; D Split Frequency Offset Setting; D Split Lock Function - Icom i9100 Instruction Manual

6
FUNCTIONS FOR TRANSMIT

■ Quick Split function

When you hold down [SPLIT] for 1 second, the Split
frequency operation is turned ON. The undisplayed
VFO is automatically changed according to the plus/
minus frequency shift programmed in the Set mode. Or
the VFOs are equalized when 0 kHz (default setting) is
programmed as the split frequency shift. (p. 162)
The Quick Split function is ON by default. For your
convenience, it can be turned OFF in the Set mode.
(p. 162) In this case, holding down [SPLIT] does not
equalize the VFO A and VFO B frequencies.
q Suppose you are operating at 21.290 MHz (USB) in
VFO A.
w Hold down [SPLIT] for 1 second.
• Split frequency operation is turned ON.
• The transmit (VFO B) frequency is equalized to the re-
ceive (VFO A) frequency.
e While holding down [XFC], rotate [MAIN DIAL] to
set the frequency offset between transmit and re-
ceive.
• When [XFC] is released, the receive frequency is dis-
played.

D Split frequency offset setting

By setting an often-used split frequency offset in ad-
vance, you can use the Quick Split function to select
split operation at the push of one switch.
Set the split frequency offset in advance in the "SPLIT
Offset" item of the Set mode. (p. 162)
The example at right shows the split offset is set to
+0.020 MHz.
➥ Hold down [SPLIT] for 1 second. to activate the
Quick Split function.
• The transmit frequency shifts from the receive frequency
according to the "SPLIT Offset" option in the Set mode.
(p. 162)

D Split Lock function

The Split Lock function is convenient for changing only
the transmit frequency. When the Split Lock function is
not used, accidentally releasing [XFC] while rotating
[MAIN DIAL], changes the receive frequency.
The Split Lock function is OFF by default, but can be
turned ON in the Set mode.
q While split frequency operation is ON, hold down
[SPEECH/LOCK] for 1 second to activate the split
lock function.
• "
" appears.
w While holding down [XFC], rotate [MAIN DIAL] to
change the transmit frequency.
• If you accidentally release [XFC] while rotating the
[MAIN DIAL], the receive frequency does NOT change.
83
[XFC]
• After holding down [SPLIT]
2 1 . 2 9 0 0 0
M1
A G C D U P C O M P
Shows the equalized transmit (VFO B) frequency
• After holding down [SPLIT] when the split
offset is set to "+0.020" in the Set mode
SET S P L I T O f f s e t
Ù Ú
16
(Set mode screen)
2 1 . 3 1 0 0 0
M1
A G C D U P C O M P
Shows the shifted transmit (VFO B) frequency
[XFC] [MAIN DIAL] [SPEECH/LOCK]
[SPLIT]
[MAIN DIAL]
Appears
T B W S C P
+ 0 . 0 2 0 M H z
Appears
T B W S C P