D Setting/Cancelling Select Memory Channels; D Select Memory Scan - Icom i9100 Instruction Manual

11
SCANS
■ Memory scan (Memory mode) (Continued)

D Setting/Cancelling Select Memory channels

All Memory channels can be set as Select Memory
channels, except for the Scan Edge and Call channels.
➥ When the "SCAN" screen is displayed, push [SEL]
(F-3), or when the "MEM" screen (Memory Menu)
is displayed, push [SEL](F-5) to set or cancel the
displayed Memory channel as a Select Memory
channel.
• "SEL" appears when the channel is set as a Select
Memory channel.
• An error beep sounds when the displayed Memory
channel is a blank channel.
• Holding down
displays "SEL ALL Clear?." Hold down [YES](F-4) to
clear all Select Memory channel settings.

D Select Memory scan

Select Memory scan searches for signals through
Memory channels specified as "Sel" (Select).
NOTE: For a Select Memory scan to start, two or
more Memory channels must be designated as Se-
lect Memory channels. (See above)
q Follow steps q through t as described in 'D
Memory scan' on the previous page, to start Mem-
ory scan.
• While scanning, holding down [MEM](F-1) for 1 second
turns ON the Mode Select scan.
w Push [SEL](F-3) to turn ON the Select Memory
scan.
• The scan changes to a Select Memory scan.
• "SEL–MEMO SCAN" blinks while scanning.
• Pushing [SEL](F-3) toggles between Memory scan (or
Mode Select scan)* and Select Memory scan.
*Only when the Mode Select scan is turned ON.
• If "Up/Down" is selected as the "MAIN DIAL (SCAN)"
option in the Scan Set mode, rotating [MAIN DIAL]
changes the scanning direction. (p. 147)
e Push [MEM](F-1) to cancel the scan.
About the scan type switching procedure
You can switch the scan type between various scans while scanning, as shown below.
SCAN
M E M
Hold down
[MEM](F-1)
SCAN
M E M
151
[SEL](F-3) [SEL](F-5)
or for 1 second
Memory scan
MEMO SCAN
∂ F
S E L SPAN
Mode Select scan
MODE−SEL SCAN
∂ F
S E L SPAN
SCAN
M E M
MEM
E D T
SCAN
M E M
SCAN
M E M
S E T
Push
[SEL](F-3)
S E T
Push
[SEL](F-3)
∂ F
:
∂ F
S E L SPAN
"SCAN" screen
14.19500 USB
( )
"MEM" screen (Memory Menu)
MEMO SCAN
∂ F
S E L SPAN
Push
SEL−MEMO SCAN
∂ F
S E L SPAN
While Select Memory scanning
Select Memory scan
SEL−MEMO SCAN
SCAN
∂ F
M E M S E L SPAN
Select Memory scan
SEL−MEMO SCAN
SCAN
∂ F
M E M S E L SPAN
Appears
±
1 0 k
S E T
S E L
S E T
S E T
S E T
S E T