Icom i9100 Instruction Manual page 128

8
DV MODE OPERATION
■ DV Set mode description (Continued)
RX RPT Write
7.
Turn the repeater call sign automatic write function ON
or OFF.
When you receive a call addressed to your own call
sign through a repeater, this function automatically
sets the repeater call signs included in the signal, into
your current "R1" and "R2."
While in the DR mode, this function is disabled.
OFF : Turns OFF the function.
Auto : Automatically sets the call sign of the used re-
peater into your "R1" and "R2."
8. DV Auto Detect
Turn the DV mode automatic detect function ON or
OFF.
When receiving other than a DV mode signal, dur-
ing DV mode operation, this function automatically
switches to the FM mode.
• OFF : Turns OFF the function. The operating mode
is fixed to the DV mode.
• ON : Automatically selects the FM mode for tem-
porary operation.
The received FM audio may be distorted when re-
ceiving an FM signal with this function.
Edit Record
9.
Select an option for the call sign edit record function.
When a call sign in the memory is edited, this function
saves the new call sign in a different memory than the
original one.
• OFF : Turns OFF the function. The previously set call
sign is overwritten with the edited call sign.
• Select : The edited call sign is programmed into the
selected call sign memory.
• Auto : The edited call sign is automatically pro-
grammed into a blank memory.
Gateway Auto Set
10.
Turn the gateway automatic set function ON or OFF for
calling an individual station in the DR mode.
This function enables the transceiver to automatically
set the pre-programmed gateway repeater in "R2."
• OFF : Even selecting an individual station in "UR,"
the previously used repeater call sign re-
mains in R2.
• Auto : After selecting an individual station in "UR,"
the pre-programmed gateway repeater is au-
tomatically set in R2.
119
(Default: OFF)
11.
The transceiver can record data of up to 20 individual
calls.
Select whether to record all calls or only the latest call
whose called station did not reply, or whose Link re-
peater was not found.
• ALL
• Latest Only : Records only the latest call.
12.
When a call is received, the call sign of the calling sta-
tion can be automatically displayed.
(Default: OFF)
• OFF : Turns OFF the function.
• Auto : Automatically displays the call sign of the
13.
Select whether or not to display the programmed call
sign (MY or UR) at the beginning of your transmis-
sion.
• OFF : Turns OFF the function.
• UR
• MY
(Default: Auto)
14.
Select whether or not to display and scroll a received
message.
• OFF : Does not display the message. To check the
• Auto : Automatically displays and scrolls the mes-
15.
Select the scrolling speed of a message or call sign.
(Default: Auto)
• Slow : Sets the scrolling speed to "Slow."
• Fast
16.
Select whether or not to display a selected station or
repeater call sign when the DR mode is selected, or
when you switch the "UR," "R1" and "R2" display while
in the DR mode.
• OFF : A call sign is not displayed.
• ON
RX Record (RPT)
: Records all calls.
RX Call Sign Disp
calling station.
TX Call Sign Disp
: Displays the call sign of the station you
called.
: Displays your own call sign.
RX Message Disp
message, push [CD] (F-2) in M3, and then
select MSG.
sage.
Scroll
: Sets the scrolling speed to "Fast."
DR Call Sign Popup
: A call sign is displayed.
(Default: ALL)
(Default: Auto)
(Default: UR)
(Default: Auto)
(Default: Fast)
(Default: ON)