11.
GPS Auto TX
Select the desired interval from OFF, 5, 10, 30 sec-
onds, 1, 3, 5, 10 or 30 minutes for automatic position
data transmission.
The current position data, received from a GPS re-
ceiver, is transmitted at the selected interval when
"GPS" or "GPS-A" is selected as the "GPS TX Mode"
option as described below.
The GPS message is transmitted as well as the posi-
tion data, if it is programmed.
Even if this setting is set to OFF, you can manually
transmit the position data by pushing [TRANSMIT] or
[PTT] (microphone).
NOTE:
• When four GPS sentences are selected at the
same time, "5sec" cannot be selected.
• When "Manual" is selected in "My Position," the
current position data will not be automatically
transmitted.
12.
GPS TX Mode
Select the GPS or GPS-A operating mode to transmit
the position data from a GPS receiver, or turn OFF the
function.
NOTE: When "GPS" or "GPS-A" is selected, low-
speed data communication cannot be used.
GPS Sentence (RMC)
13.
Turn the GPS sentence formatter "RMC" ON or OFF.
GPS Sentence (GGA)
14.
Turn the GPS sentence formatter "GGA" ON or OFF.
GPS Sentence (GLL)
15.
Turn the GPS sentence formatter "GLL" ON or OFF.
GPS Sentence (GSA)
16.
Turn the GPS sentence formatter "GSA" ON or OFF.
GPS Sentence (VTG)
17.
Turn the GPS sentence formatter "VTG" ON or OFF.
(Default: OFF)
(Default: Disable)
(Default: OFF)
1
*
1
(Default: ON)
*
1
(Default: OFF)
*
(Default: OFF)
1
*
(Default: OFF)
1
*
GPS/GPS-A OPERATION
GPS Sentence (GSV)
18.
Turn the GPS sentence formatter "GSV" ON or OFF.
NOTE for GPS sentences:
• Up to four GPS sentences are usable at the same
time.
• See page 122 for GPS sentence setting details.
Unproto Address
19.
(Default: API910,DSTAR✱)
Enter an unproto address of up to 56 characters. The
manually programmed data can be memorized.
• Unproto address programming
q Push [EDT](F-4) to enter the unproto address edit
mode.
w Push [F-1] one or more times to select the desired
character type.
Character type
ABC
A to Z
abc
a to z
! # $ % & \ ? " ' ` ^ + – ✱ ⁄ . , : ; = < >
etc
( ) [ ] { } ¦ _ ¯ @
e Rotate [MAIN DIAL] to select the first character or
symbol to input.
• When entering number or a decimal point, push the ap-
propriate keypad key.
• Push [DEL](F-4) to delete the selected character, sym-
bol or number.
• Push [SPC](F-5) to input a space.
• When all 56 characters have been programmed, an
error beep sounds. If you want to reprogram, push [Ω]
(F-2) or [≈](F-3) to select a character, then push [DEL]
(F-4) to delete it.
r Push [Ω](F-2) to move the cursor backward, or push
[≈](F-3) to move the cursor forward.
t Repeat steps w through r to program an unproto
address of up to 56 characters.
y Push [MENU] to save the unproto address, and re-
turn to the "SET" screen.
1
*
Appears when "GPS" is selected in "GPS TX Mode."
2
*
Appears when "GPS-A" is selected in "GPS TX Mode."
1
(Default: OFF)
*
2
*
Selectable characters
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
134