Break-In Function; D Semi Break-In Operation; D Full Break-In Operation - Icom i9100 Instruction Manual

6
FUNCTIONS FOR TRANSMIT

■ Break-in function

(Mode: CW)
The Break-in function is used in the CW mode to auto-
matically toggle the transceiver between transmit and
receive when keying. The IC-9100 is capable of Full
Break-in or Semi Break-in.

D Semi Break-in operation

During Semi Break-in operation, the transceiver imme-
diately transmits when you key down, then returns to
receive after a pre-set delay time has passed after you
stop keying.
q Push [CW/RTTY] to select the CW or CW-R mode.
w Push [VOX/BK-IN] one or more times to turn ON
the Semi Break-in function.
• "BK-IN" appears.
e Set the break-in delay time (the delay from transmit
to receive).
➥ Hold down [VOX/BK-IN] for 1 second to display
the "BKIN" screen (Break-in).
➥ Rotate [MAIN DIAL] to select the desired delay.
• Hold down [F-3] for 1 second to reset to the default
setting, if desired.
r Push [MENU] to return to the previous menu.
When using a paddle, rotate [KEY SPEED] to adjust
the keying speed.

D Full Break-in operation

During Full Break-in operation, the transceiver trans-
mits when you key down, then immediately returns to
receive when you release.
q Push [CW/RTTY] to select the CW or CW-R mode.
w Push [VOX/BK-IN] one or more times to turn ON
the Full Break-in function.
• "FBK-IN" appears.
When using a paddle, rotate [KEY SPEED] to adjust
the keying speed.
79
[MENU] [CW/RTTY]
[KEY SPEED] [VOX/BK-IN]
Appears
Break-IN Delay
BKIN
Shows break-in delay time
Appears
M1
A G C D U P 1 ⁄ 4
[MAIN DIAL]
7 . 5 d
K E Y S C P