D Copying The Call Record Contents Into Call Sign Memory - Icom i9100 Instruction Manual

D Copying the call record contents into call sign memory

This is a way to copy the call record data ("CALLER,"
"RXRPT1" and "RXRPT2") into call sign memory "UR"
and a repeater all at the same time, or individually.
q Push [DV•DR] to select the DV mode.
w Push [MENU] one or more times to display the "M3"
screen (Menu 3).
• In the DR mode, push [MENU] once or twice to select
the "D1" screen.
e Push [CD](F-2) to display the "CD" screen (Call Re-
cord).
r Rotate [MAIN DIAL] to select the desired record
channel (RX01 to RX20).
t Push [COPY](F-5) to enter the copy item selection
mode.
CD ≈
JG3YMK
Ú
�CQCQCQ
y Push [Y](F-1) or [Z](F-2) to select the item to be
copied.
• ALL : The CALLER, RXRPT1 and RXRPT2
call signs.
• CALLER : The calling station's call sign
• RXRPT1 : The call sign of the repeater the call-
ing station accessed, or the call sign of
the gateway repeater the calling station
used.
• RXRPT2 : The call sign of the repeater your heard
the call on.
COPY
CALLER: JG3YMK
Ù Ú
The options in step u are different, depending on
your selection in step y.
When "ALL" is selected in step y:
u Select the desired copy destination.
• LIST : Hold down [LIST](F-4) for 1 second
to automatically search a blank call
sign memory channel, then copy the
call signs of CALLER, RXRPT1 and
RXRPT2 into the channel.
• CURR : Hold down [CURR](F-5) for 1 second
to copy the call signs of CALLER,
RXRPT1 and RXRPT2 into the cur-
rent "UR," "R1" and "R2" memory.
COPY
ALL
Ù Ú
RX01
CLR COPY
AUTO SEL
LIST CURR
DV MODE OPERATION
When "CALLER" is selected in step y:
u Select the desired copy destination
• AUTO : Hold down [AUTO](F-4) for 1 second
to automatically search for a blank
call sign memory channel, and copy
the selected call sign into the de-
tected one.
• SEL : Push [SEL](F-5) to enter the call sign
memory channel selection mode.
Rotate [MAIN DIAL] to select the de-
sired channel to be pasted.
• The contents of the selected chan-
nel is displayed in parentheses.
Hold down [SET](F-5) for 1 second
to paste the calling station's call sign
into the selected channel. If a call
sign has already been programmed,
the selected channel will be overwrit-
ten.
COPY CALLER: JG3YMK
Ù Ú
UR
CALLER: JG3YMK
Ú ( J G 3 Y M K )
When "SEL" is selected, memory channel num-
ber and call sign blink.
When "RXRPT1" or "RXRPT2" is selected in step y:
u Hold down [RP-L](F-5) to copy the repeater call
sign into the repeater list "R1" or "R2."
COPY RxRPT1:
Ù Ú
i After copying has been completed, transceiver au-
tomatically returns to the "CD" screen.
[√] [CD] [CLR]
[MENU] [DV DR]
8
AUTO SEL
Push
≈ U01
S E T
RP–L
[MAIN DIAL]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
98