I Copying Memory/Call Contents - Icom IC-91A Instruction Manual

I Copying memory/call contents

This function transfers a memory channel's contents to VFO
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the offset frequency, subaudible tone frequency etc.
D Memory/call➪VFO
q Select the memory (call) channel to be copied.
➥ Push [MR/S.MW] or [CALL/RX➝CS] to select memory
mode or call channel mode, then rotate [DIAL] to select
the desired channel.
wPush and hold [MR/S.MW] for 1 sec. to enter select mem-
ory write mode.
• 1 short and 1 long beep sound.
• "µ µ
" indicator blinks.
e Rotate [DIAL] to select "VFO."
rPush and hold [MR/S.MW] for 1 sec. to write the selected
channel contents to VFO mode.
• Returns to VFO mode automatically.
[EXAMPLE]: Copying memory channel 11 to VFO.
During memory mode,
rotate [DIAL] to select
memory channel 11 .
Push
for 1 sec.
FM FM
145 870
A
µ 011
D Memory/call➪memory/call
q Select the memory (call) channel to be copied.
wPush and hold [MR/S.MW] for 1 sec. to enter select mem-
e Rotate [DIAL] to select the target memory (call) channel.
r Push and hold [MR/S.MW] for 1 sec. again to copy.
FM FM
145 870
r µ 011
BANK BANK :---- :----
MNAME: MNAME:
SKIP :OFF SKIP :OFF
MEMORY/CALL CHANNELS
Pushing [MR/S.MW] for 2 sec. at the step w, will also
copy the memory contents to VFO. In this case, the steps
e and r are not necessary.
➥ Push [MR/S.MW] or [CALL/RX➝CS] to select memory
mode or call channel mode, then rotate [DIAL] to select
the desired memory channel.
ory write mode.
• 1 short and 1 long beep sound.
• "µ µ
" indicator blinks.
• Do not hold [MR/S.MW] for more than 2 sec. otherwise the
memory contents will be copied to VFO.
Rotate [DIAL] to select
VFO .
Push
FM FM
145 000 for 1 sec.
µ VFO
VFO is selected.
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
FM FM
145 870
A
18
PSKIP PSKIP
19
71