Step2 Save The Destination Call Sign Into Your Call Sign Memory From The Rx History - Icom ID-51A Basic Instructions

New2001 New2001
Save the destination call sign into your
STEP 2
call sign memory from the RX History
While in the RX HISTORY
q
screen, push D-pad(!) to se-
lect the RX HISTORY record
with the call sign that you
want to save to memory.
Call sign to be saved
Push D-pad(Ent), and then
w
push [QUICK]
New2001
2
HOW TO USE THE RX HISTORY
Save the destination call sign into your call sign
STEP 2
memory from the RX History (Continued)
Push D-pad( !) to select
t
"NAME," and then push D-
pad(Ent).
D-pad
(Ent)
( )
Rotate [DIAL] to select a
y
desired character to enter a
name of up to 16 characters,
including spaces.
23
.
Go to step e
Go to step u
HOW TO USE THE RX HISTORY
Push D-pad( !) to select "To
e
Your Memory," and then push
D-pad(Ent).
Push D-pad( !) to select the
r
call sign that you want to save,
and then push D-pad(Ent).
The display changes to the
YOUR CALL SIGN EDIT
screen, and then the call sign
is automatically saved.
About text entry
D-pad(") to move the
push [QUICK] to change
the character to an upper case
or lower case letter.
[QUICK] to open the input
mode selection window.
- Push D-pad(!") to select
the desired Upper case let-
ters, Lower case letters, Numbers or Symbols.
- To enter symbols, select "!"#," and then push D-pad(Ent)
to open the symbol character selection window. And ro-
tate [DIAL] to select the desired symbol character, and
then push D-pad(Ent).
lected character, symbol or number, or hold down [CLR]
to continuously erase the characters, first to the right, and
then to the left of the cursor.
2
Go to step t
Continued on the next page
Input mode selection
window
to delete the se-
2
22
New2001