Default Settings - Fujitsu Siemens Computers PRIMERGY BX Description

9 Default Settings

The overview default settings for the system module are shown in the following
9.1
table.
Manageme
nt
CLI
HTTP
SNMP v1/v2c/v3
System
Management VLAN
WEB Management
Traps
SNMP Communities public : Read Only
User Name
Password
Serial Port
IP Settings
Port Status
Admin Status enable
Negotiate
Port Speed
Duplex Mode port1~10 : full
Flow Control disable
Port Priority
663
serial port / telnet / ssh
Java Applet / SSL3.0 , TLS 1.0
Enterprise MIBs / Standard MIBs / RMON
HTTP Mode (Unsecure): Enabled
HTTP Port: 80
Authentication Flag............................ Enable
Link Up/Down Flag.............................. Enable
Multiple Users Flag............................ Enable
Spanning Tree Flag............................. Enable
DVMRP Traps.................................... Disable
OSPF Traps..................................... Disable
PIM Traps...................................... Disable
private : Read/Write
admin
admin
baud rate 9600
IP address and netmask: 0.0.0.0 0.0.0.0 on VLAN
1
enable
port1~10 : 1G
port11~16 : 10/100/1G
port17~18 : 10G
port11~16 : half / full
port17~18 : full
Default Settings
Lan Switch and Router Blade