Configuration Commands - Fujitsu Siemens Computers PRIMERGY BX Description

Protocol Independent Multicast – Sparse Mode (PIM-SM) Commands
7.31.1.8 show ip pimsm staticrp
This command displays the static RP information for the PIM-SM router.
Syntax
show ip pimsm staticrp
Default Setting
None
Command Mode
Privileged Exec
Display Message
Address: This field displays the IP address of the RP.
Group Address: This field displays the group address supported by the RP.
Group Mask: This field displays the group mask for the group address.

7.31.2 Configuration Commands

7.31.2.1 ip pimsm
This command sets administrative mode of PIM-SM multicast routing across the router to
enabled. IGMP must be enabled before PIM-SM can be enabled.
Syntax
ip pimsm
no ip pimsm
no - This command sets administrative mode of PIM-SM multicast routing across the
router to disabled. IGMP must be enabled before PIM-SM can be enabled.
Default Setting
Disbaled
Command Mode
Global Config
650
Command Reference
Lan Switch and Router Blade