Router Discovery Protocol Commands
Preferences Displays the preference of the address as a default router address, relative to
other router addresses on the same subnet.
7.24.2 ip irdp
This command enables Router Discovery on an interface.
Syntax
ip irdp
no ip irdp
<no> - Disable Router Discovery on an interface.
Default Setting
Disabled
Command Mode
Interface Config
7.24.3 ip irdp broadcast
This command configures the address to be used to advertise the router for the interface.
Syntax
ip irdp broadcast
no ip irdp broadcast
broadcast - The address used is 255.255.255.255.
no - The address used is 224.0.0.1.
Default Setting
The default address is 224.0.0.1
Command Mode
Interface Config
7.24.4
ip irdp holdtime
This commands configures the value, in seconds, of the holdtime field of the router
605
Command Reference
Lan Switch and Router Blade