Snmp Trap Commands - Fujitsu Siemens Computers PRIMERGY BX Description

Management Commands
snmp-server enable traps pim
no snmp-server enable traps pim
no - This command disables PIM trap.
Default Setting
Enabled
Command Mode
Global Config
This command enables the sending of new root traps and topology change notification traps.
Syntax
snmp-server enable traps stpmode
no snmp-server enable traps stpmode
no - This command disables the sending of new root traps and topology change
notification traps.
Default Setting
Enabled
Command Mode
Global Config

7.5.5 SNMP Trap Commands

7.5.5.1 show snmptrap
This command displays SNMP trap receivers. Trap messages are sent across a network to an
SNMP Network Manager. These messages alert the manager to events occurring within the
switch or on the network. Six trap receivers are simultaneously supported.
Syntax
391
Command Reference
Lan Switch and Router Blade