Virtual Router Redundancy Protocol (VRRP) Commands
7.26 Virtual Router Redundancy Protocol (VRRP) Commands
7.26.1 Show Commands
7.26.1.1 show ip vrrp
This command displays whether VRRP functionality is enabled or disabled. It also displays
some global parameters which are required for monitoring.
Syntax
show ip vrrp
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
Admin Mode Displays the administrative mode for VRRP functionality on the switch.
Router Checksum Errors Represents the total number of VRRP packets received with an
invalid VRRP checksum value.
Router Version Errors Represents the total number of VRRP packets received with
Unknown or unsupported version number.
Router VRID Errors Represents the total number of VRRP packets received with invalid
VRID for this virtual router.
7.26.1.2 show ip vrrp brief
This command displays information about each virtual router configured on the switch.
Syntax
show ip vrrp brief
Default Setting
None
Command Mode
Privileged Exec, User Exec
609
Command Reference
Lan Switch and Router Blade