Configuration Commands - Fujitsu Siemens Computers PRIMERGY BX Description

Virtual Router Redundancy Protocol (VRRP) Commands
<vrid> - Virtual router ID.
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
VRID Represents the router ID of the virtual router.
Uptime Is the time that the virtual router has been up, in days, hours, minutes and seconds.
Protocol Represents the protocol configured on the interface.
State Transitioned to Master Represents the total number of times virtual router state has
changed to MASTER.
Advertisement Received Represents the total number of VRRP advertisements received by
this virtual router.
Advertisement Interval Errors Represents the total number of VRRP advertisements
received for which advertisement interval is different than the configured value for this virtual
router.
Authentication Failure Represents the total number of VRRP packets received that don't
pass the authentication check.
IP TTL errors Represents the total number of VRRP packets received by the virtual router
with IP TTL (time to live) not equal to 255.
Zero Priority Packets Received Represents the total number of VRRP packets received by
virtual router with a priority of '0'.
Zero Priority Packets Sent Represents the total number of VRRP packets sent by the
virtual router with a priority of '0'
Invalid Type Packets Received Represents the total number of VRRP packets received by
the virtual router with invalid 'type' field.
Address List Errors Represents the total number of VRRP packets received for which
address list does not match the locally configured list for the virtual router.
Invalid Authentication Type Represents the total number of VRRP packets received with
unknown authentication type.
Authentication Type Mismatch Represents the total number of VRRP advertisements
received for which 'auth type' not equal to locally configured one for this virtual router.
Packet Length Errors Represents the total number of VRRP packets received with packet
length less than length of VRRP header.

7.26.2 Configuration Commands

7.26.2.1 ip vrrp
This command enables the administrative mode of VRRP in the router.
Syntax
ip vrrp
no ip vrrp
611
Command Reference
Lan Switch and Router Blade