Configuration Commands - Fujitsu Siemens Computers PRIMERGY BX Description

IP Routing Commands
This command displays detailed information about the route preferences. Route preferences
are used in determining the best route. Lower router preference values are preferred over
higher router preference values.
Syntax
show ip route preferences
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
Local: This field displays the local route preference value.
Static: This field displays the static route preference value.
OSPF Intra: This field displays the OSPF intra route preference value.
OSPF Inter: This field displays the OSPF inter route preference value.
OSPF Ext T1: This field displays the OSPF Type-1 route preference value.
OSPF Ext T2: This field displays the OSPF Type-2 route preference value.
RIP: This field displays the RIP route preference value.
7.19.1.8 show ip traffic
This command displays IP statistical information. Refer to RFC 1213 for more information
about the fields that are displayed.
Syntax
show ip traffic
Default Setting
None
Command Mode
Privileged Exec, User Exec
7.19.2

Configuration Commands

7.19.2.1 routing
550
Command Reference
Lan Switch and Router Blade