CoS (Class of Service) Command
Syntax
Ip access-group <1- 199> in [<1-4294967295>]
<1- 199> The identifier of this ACL.
<1-4294967295> The sequence number of this ACL.
Default Setting
None
Command Mode
Global Config, Interface Config
7.17 CoS (Class of Service) Command
7.17.1 Show Commands
7.17.1.1 show queue cos-map
This command displays the current Dot1p (802.1p) priority mapping to internal traffic classes
for a specific interface. The slot/port parameter is optional and is only valid on platforms that
support independent per-port class of service mappings. If specified, the 802.1p mapping table
of the interface is displayed. If omitted, the most recent global configuration settings are
displayed.
Syntax
show queue cos-map <slot/port>
< slot/port > The interface number.
Default Setting
None
Command Mode
Privileged EXEC, User EXEC
530
Command Reference
Lan Switch and Router Blade