Spanning Tree Commands
Bridge Hold Time: Minimum time between transmission of Configuration Bridge Protocol
Data Units (BPDUs).
7.6.2 Configuration Commands
7.6.2.1
spanning-tree
This command sets the spanning-tree operational mode to be enabled.
Syntax
spanning-tree
no spanning-tree
no - This command sets the spanning-tree operational mode to be disabled. While
disabled, the spanning-tree configuration is retained and can be changed, but is not
activated.
Default Setting
Disabled
Command Mode
Global Config
7.6.2.2
spanning-tree protocol-migration
This command enables BPDU migration check on a given interface. The all option enables
BPDU migration check on all interfaces.
Syntax
spanning-tree protocol-migration {<slot/port> | all}
<slot/port> - is the desired interface number.
all - All interfaces.
Default Setting
412
Command Reference
Lan Switch and Router Blade