Link up & Port Backup State Commands
Mode - For the admin mode to disable or enable or not
Back/Up port(s) - The list of interfaces that are designated for Up/Down Stream port
number
7.12.2 Configuration Commands
7.12.2.1
link State
This command is to Enable/Disable the link state admin mode. Use 'link state' to enable the
admin mode of redundant function, and use no command to disable the function
Syntax
link state / no link state
Default Setting
Disable
Command Mode
Global Config
7.12.2.2 link State group
This command is to Create/Destroy the link state group. Use 'link state group' to create a group.
Use no command to destroy the group.
Syntax
link state group / no link state group
Default Setting
0
Command Mode
Global Config
7.12.2.3 link State group
This command is to Create/Destroy the link state group. Use 'link state group' to create a group.
Use no command to destroy the group.
Syntax
471
Command Reference
Lan Switch and Router Blade