Address Resolution Protocol (Arp) Commands; Show Commands - Fujitsu Siemens Computers PRIMERGY BX Description

Address Resolution Protocol (ARP) Commands

None
Command Mode
Global Config.
7.18 Address Resolution Protocol (ARP) Commands

7.18.1 Show Commands

7.18.1.1 show ip arp
This command displays the Address Resolution Protocol (ARP) cache.
Syntax
show ip arp
Default Setting
None
Command Mode
Privileged Exec
Display Message
Age Time: Is the time it takes for an ARP entry to age out. This value was configured into the
unit. Age time is measured in seconds.
Response Time: Is the time it takes for an ARP request timeout. This value was configured
into the unit. Response time is measured in seconds.
Retries: Is the maximum number of times an ARP request is retried. This value was
configured into the unit.
Cache Size: Is the maximum number of entries in the ARP table. This value was configured
540
Command Reference
Lan Switch and Router Blade