Ip Routing Commands; Show Commands - Fujitsu Siemens Computers PRIMERGY BX Description

IP Routing Commands

7.19 IP Routing Commands

7.19.1 Show Commands

7.19.1.1 show ip brief
This command displays all the summary information of the IP.
Syntax
show ip brief
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
Default Time to Live: The computed TTL (Time to Live) of forwarding a packet from the local
router to the final destination.
Routing Mode: Show whether the routing mode is enabled or disabled.
IP Forwarding Mode: Disable or enable the forwarding of IP frames.
Maximum Next Hops: The maximum number of hops supported by this switch.
7.19.1.2 show ip interface port
This command displays all pertinent information about the IP interfaces.
Syntax
show ip interface port <slot/port>
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
IP Address: Is an IP address representing the subnet configuration of the router interface.
546
Command Reference
Lan Switch and Router Blade