Device Configuration Commands
Syntax
switchport unicast packet-rate {1 | 2 | 3 | 4}
1 - Threshold level represents 64 pps (packet per second).
2 - Threshold level represents 128 pps (packet per second).
3 - Threshold level represents 256 pps (packet per second).
4 - Threshold level represents 512 pps (packet per second).
Default Setting
Level 4
Command Mode
Interface Config
This command will protect your network from unicast storms by setting a threshold level for
unicast traffic on all ports.
Syntax
switchport unicast all packet-rate {1 | 2 | 3 | 4}
1 - Threshold level represents 64 pps (packet per second).
2 - Threshold level represents 128 pps (packet per second).
3 - Threshold level represents 256 pps (packet per second).
4 - Threshold level represents 512 pps (packet per second).
all - This command represents all interfaces.
Default Setting
Level 4
Command Mode
Global Config
7.4.8 L2 Priority
362
Command Reference
Lan Switch and Router Blade