Port Mirror - Fujitsu Siemens Computers PRIMERGY BX Description

Device Configuration Commands
6 3
7 3
Command Mode
Interface Config

7.4.9 Port Mirror

7.4.9.1 show port-monitor session
This command displays the Port monitoring information for the specified session.
Syntax
show port-monitor session <SessionNum>
Default Setting
None
Command Mode
Privileged Exec
Display Message
Session ID: indicates the session ID.
Admin Mode: indicates whether the Port Monitoring feature is enabled or disabled. The
possible values are enabled and disabled.
Probe Port: is the slot/port that is configured as the probe port. If this value has not been
configured, 'Not Configured' will be displayed.
Mirrored Port: is the slot/port that is configured as the monitored port. If this value has not
been configured, 'Not Configured' will be displayed.
7.4.9.2 port-monitor session
This command configures a probe (destination) port or a mirrored (source) port for a monitor
session (port monitoring). Users can add more than one mirrored port for a monitor session.
Syntax
port-monitor session <session-id> {(source | destination) interface <slot/port> }
364
Command Reference
Lan Switch and Router Blade