Configuration Commands - Fujitsu Siemens Computers PRIMERGY BX Description

System Log Management Commands
Command Mode
Privileged Exec
Display Message
Number of Traps since last reset:
this device.
Trap Log Capacity:
The sequence number of this trap.
Log:
System Up Time:
The relevant information of this trap.
Trap:
Note:
Trap log information is not retained across a switch reset.
7.7.3.1 show logging hosts
This command displays all configured logging hosts.
Syntax
show logging hosts
Default Setting
None
Command Mode
Privileged Exec
Display Message
Index (used for deleting)
IP Address IP Address of the configured server.
Severity The minimum severity to log to the specified address.
Port Server Port Number.This is the port on the local host from which syslog messages are
sent.
Status The state of logging to configured syslog hosts. If the status is disable, no logging
occurs.

7.7.4 Configuration Commands

7.7.4.1 logging buffered
This command enables logging to in-memory log where up to 128 logs are kept.
424
The number of traps that have occurred since the last reset of
The maximum number of traps that could be stored in the switch.
The relative time since the last reboot of the switch at which this trap occurred.
Command Reference
Lan Switch and Router Blade