Configuration Commands - Fujitsu Siemens Computers PRIMERGY BX Description

CDP (Cisco Discovery Protocol) Commands
Network Switch.
Port Id: Identifies the port on which the CDP packet is sent.
7.11.1.3 show cdp traffic
This command displays the CDP traffic counters information.
Syntax
show cdp traffic
Default Setting
None
Command Mode
Privileged Exec
Display Message
Incoming packet number: Received legal CDP packets number from neighbors.
Outgoing packet number: Transmitted CDP packets number from this device.
Error packet number: Received illegal CDP packets number from neighbors.

7.11.2 Configuration Commands

7.11.2.1 cdp
This command is used to enable CDP Admin Mode.
Syntax
cdp
no cdp
no - This command is used to disable CDP Admin Mode.
Default Setting
Enabled
467
Command Reference
Lan Switch and Router Blade